Gamester Lan-Party RC73220 Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przełącznik Gamester Lan-Party RC73220. Gamester Lan-Party RC73220 2 stron. Ethernet hub

Drukuj stronę

INTRODUCTION

Congratulations on choosing the Gamester LAN

Party, the easiest way to have multiconsole,

multiplayer madness for your console systems.

CONTENTS

1 x Ethernet Hub

4 x 12ft Ethernet Cables

1 x Instruction Manual

1 x AC Adaptor

IMPORTANT

• Before using this product, read your console

Instruction Manual for safety, health and other

information.

PRODUCT FEATURES

• Connect up to 5 consoles together for up to

20 player multiplayer action (depends on

software support).

Note: To connect a fifth console, you will need

an additional ethernet cable which is not

included in the LAN Party pack.

• Connect multiple LAN Party Hubs for even

more players.

• Connect all your machines to the same

broadband internet connection.

USING YOUR LAN PARTY

Multiconsole gaming

Console 1

Console 2

Console 3

Console 4

Hub

Uplink

Normal

5/up

Port switch set to normal

Console 5

• Power down all video game consoles and

connect one end of the ethernet cable to the

ethernet port on the back of of the consoles.

Note: The PS2 requires a Network Adaptor.

• Connect the other end of cables to the 1-5

ports on the hub. Plug in hub power jack.

Make sure the port switch is set on normal.

• Power up the console systems. Configure your

game for a multiconsole multiplayer game

(depends on software support).

For connecting Multiple Hubs:

Power down all systems. Connect one end of

the ethernet cable to the ethernet port on the

back of each system.

On hub 1 connect cables to ports 1-4.

On hub 1 set the port switch to uplink.

On hub 1 connect one ethernet cable to uplink

port 5/up. Plug the other end of this cable into

port 1 on hub 2.

Repeat as necessary.

Plug in hub power jacks.

For Connection to Internet:

• Power down all systems. Connect one end of

the ethernet cable to the ethernet port on the

back of each system. Connect cables to ports

1-4 on the front of the hub.

• Connect broadband internet connection to

uplink port 5/up. Plug in hub power jack. Make

sure the selector switch is set on uplink.

• Use console Internet software to configure

video game console for Internet play.

• When connected to the Internet, only one

device may be powered on at any time. (ex. if

PS2, Xbox, and PC are connected, when Xbox

is on, PS2 and PC must be turned off.

Note: Some broadband connections are not

compatible with Lan Party system. Please

check with your Internet provider should

problems occur. Should you wish to use

multiple machines on the Internet

simultaniously, a router may be required.

TROUBLE SHOOTING

Your LAN Party is not working:

• Make sure cables are firmly connected to all

video game consoles and the Lan Party Hub.

• Make sure the Hub is plugged in and powered

on.

• Make sure the game software you are using is

compatible with the LAN Party.

• Consult your game software's manual for

proper multiplayer configuration.

• Reset all the video game consoles.