Majestic QUARTZPLA36IN Instrukcje instalacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Kominek wewnętrzny Majestic QUARTZPLA36IN. Majestic QUARTZPLA36IN 4 stron.

Drukuj stronę

Figure 7 Install Sleeves

9. Locate the two upper glass brackets that are shipped

flat. Bend the "Right" bracket as shown in Figure 8.

Bend the "Left" bracket shown in Figure 9. The rear

hand bend feature, circled in Figure 9, is left flat until

step 12.

10. Install right upper glass bracket by pushing the bracket

"up" to the firebox top and "out" to the front face of the

firebox. The front edge of the bracket should be tight

to the firebox face and the top edge of the bracket

should be tight to the firebox top. Install the bracket

by inserting the two self-tapping screws through the

bracket into the firebox. See Figure 8. Repeat step

10 for left upper glass bracket installation.

SCREW HOLES

Figure 8 Bend Upper Glass Brackets

(Upper Right Bracket Shown)

11. Install the rear glass panel by placing the lower edge

into the rear lower glass bracket. Ensure the smooth

side is facing toward the front of the fireplace. Tip

glass back until the glass touches the screw head

previously installed in Step 8. Keep one hand on the

rear glass panel and proceed to Step 12.

BEND THESE

FEATURES

Majestic • GLQUARTZ36PLA Installation Instructions • 2643-945 • 4/22

12. With one hand on the rear glass panel, bend "up"

one hand bend tab on the upper glass bracket to

approximately 90 degrees.

the hand bend tab is properly bent, the glass panel

will not tip forward. Bend "up" the hand bend tab on

the opposing bracket. The rear glass panel is now

installed. This panel will be held in place by the side

panels once they are installed.

Figure 9 Upper Glass Brackets Installed (Left Upper Bracket Shown)

13. Install left glass panel by inserting the glass panel

from the front. Slide panel back until it contacts the

rear glass panel. Ensure that the tab shown below is

bent "down" on each upper glass bracket to secure

left/right glass panels. Repeat Step 13 for right glass

panel installation.

Figure 10 Install Left Glass Panel

See Figure 9.

Once

HAND BEND TAB

SUPPORT

TAB