Bristan Descent DSC BF C Instrukcje instalacji i instrukcja obsługi - Strona 12
Przeglądaj online lub pobierz pdf Instrukcje instalacji i instrukcja obsługi dla Produkt hydrauliczny Bristan Descent DSC BF C. Bristan Descent DSC BF C 16 stron. Tap
Również dla Bristan Descent DSC BF C: Instrukcja instalacji (16 strony)
Drukuj stronę
Maintenance
General Cleaning
Bristan products are made from premium materials, with hand polishing
and electroplated finishes.
Your taps or shower should be regularly cleaned with warm water, a mild
pH-neutral liquid soap, and polished with a soft cloth. Any residues from
soap, toothpaste, shampoos and shower gels can cause blemishes if not
rinsed off straight after use.
Household bleaches and cleaners contain harsh chemicals and may damage
the surface finish. Avoid using abrasive cloths, scouring pads, scrub sponges,
steel wool or anything similar.
Some surfaces such as nickel and pewter may be affected by the dye found
in some cloths, so it is also important to avoid hanging cloths on spouts.
Cartridge/Valve Cleaning
Before carrying out any maintenance,
turn off the both water supplies or
close any isolating valves. Prise out
the handle cap, loosen the grub screw
using a 2.5mm hexagonal key and
remove the handle.
Valve
Remove the spline adaptor. Using
a suitable socket remove the valve.
Wash the valve with clean running
water and make sure that any debris
has been removed. Lightly grease the
seal (only use silicone grease), replace
the valve, spline adaptor and handle.
Tighten the grub screw and push fit
the cap.
Important: Tighten the valve/
retaining nut with the correct
size spanner / socket and apply
appropriate force/torque.
Do not overtighten.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
12
Grub
Sc rew
Handle
Sc rew
2.5 mm
hexagonal key
Ca p
Spline
Adaptor
Valve
Tap body