Airflex5D AF5D-20 Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt komputerowy Airflex5D AF5D-20. Airflex5D AF5D-20 17 stron. 2d/3d multi-projector stacking processor

Drukuj stronę

Outlook and Functions

Help tips

2.1

OSD Lock / Unlock: Continuously press [MENU] key in Front Panel or IR Remote Controller for 12

seconds, the OSD function will be locked to prevent from the changes of the settings by other people.

To press MENU key for 12 seconds again, it will unlock OSD and user can manipulate the OSD again.

2.2

Picture menu in the OSD can only be activated while the input signal is not in color [Preset Mode]. To

select [Image Properties]  [Custom]  [Save], then user can activate [Picture] menu again.

2.3

[Image Setup] menu will not be activated if the input source is not from VGA.

2.4

Procedures to do system Reset: OSD Menu [Options][Reset][Reset All]

To set [Menu Time Out] to "0", the OSD will appear till the OSD Menu has been turned off manually.

2.5

To set [Logo Time Out] to "0", the splash screen Logo will not appear while AF5D is powered on.

2.6

2.7

Shortcut Hot Keys on the front panel are only functional while the OSD menu is not activated. Once the

OSD menu is activated, these keys will be served as OSD functional keys.

2.8

In order to avoid interference among multiple AF5D during the installation, user can set ID number for

each AF5D through [Options] Menu. Press number keys in Remote Controller for the control of multiple

AF5D:

 850: simultaneous control for all AF5D

 851: control AF5D ID No. 1

 853: control AF5D ID No. 3

2.9

Please select digital signals output to projector (HDMI or DVI) to avoid image position shift. If VGA

output should be applied through DVI to VGA converter, please set projector without implementing

Auto-Adjustment in VGA input.

2.10 Each Grid pattern Grid represents 50x50 pixels no matter which input resolution is selected.

2.11 Continuously press [PATTERN] button, Grid pattern will show different colors for easy installation:

White—Red—Green—Blue—Blank.

2.12 Please use qualified HDMI cable and carefully plug in and out. Unqualified cable may cause abnormal

display.

2.13

Pay attention to the HDMI compatibility due to different cables, equipment and connection distance. If

the distance is too long, HDMI extender should be considered. It may extend the distance up to 100m.