decakila KUEN004P Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odkurzacz parowy decakila KUEN004P. decakila KUEN004P 12 stron.

or detergent into the water tank, in order to avoid damages of

the appliance.

3.Close the safety lid again.

4.Put the desired accessory (nozzle, hose, scrubbing brush etc.)

on the appliance: set the accessory on the connection and press

it up to the rubber sealing. Turn the accessory in the clockwise

direction, until it locks into the position. (Figure)

5.The brush and the curved nozzle:

The brush and the curved nozzle can be assembled on the

hosing, with the hose or the straight nozzle. (Figure)

6.Window wiper:

Warning! Do not operate this appliance directly on cold glass.

The window wiper must be rattached to the scrubbing brush.

Assemble the scrubbing brush in the appliance or the hose at

first. Take off the cloth from the scrubbing brush and connect

with window wiper to the brush by the two hinges (figure). The

window wiper can be dismantles easily by loosening the hinges

again.

OPERATION

7.Attach the appliance to the mains supply and the control

lamp lights up. As soon as the preheating (about 3-4 min) is

terminated, the control lamp goes out.

Make sure that you can not switch the appliance on during the

preheating process. Switch the appliance on and move it slowly

over the surface, which is to be cleaned. It is recommended that