IKEA ENHET Instrukcja instalacji - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wyposażenie wnętrz IKEA ENHET. IKEA ENHET 20 stron. Kitchen
Również dla IKEA ENHET: Instrukcja instalacji (10 strony), Instrukcja instalacji (16 strony)

Drukuj stronę

Preparing your room

Marking key measurements

There are some critical measurements you need to consider and mark

on your walls in order to secure proper alignment, leave adequate room

for your work area and follow appliances requirements. Remember to

consider the space needed for doors and drawers to open properly,

making sure there will be no collisions with, for instance radiators or

windowsills, when opening drawers and doors.

1. From the highest point (A) that you have found

at the very beginning, mark on the wall 34½"

(876 mm), then use the cross line laser level to

trace a line across tthe wall where the base units

will be placed. This is where the top of your base

cabinets and frames will end up.

2. Finally, mark the top line wall units at 84½"

(2146 mm) from the highest point (A) and trace

a horizontal line as with the other mark. The line

represents the top position of the wall cabinets

and frames.

HOOD

OVEN

3. With the lines marked, double-check that your

plumbing and electrical outlets fit with your layout

plan.

4. Pay attention to the required minimum distance

between cooktop and hood. This can be found in

the extractor hood assembly instruction.

5. If you have a kitchen with a corner, you build the

corner base solution with a regular ENHET base

corner cabinet and an ENHET corner panel. For the

positioning of this solution, see page 10.

84½"

(2146 mm)

34½"

(876.3 mm)

6. Mark the end and the beginning of a cabinet,

frame and appliances. Draw it on the wall to

complete your kitchen layout.

7. The dishwasher should only be installed between

two cabinets or at least between one cabinet and

an end panel. This in order to secure the appliance

properly and provide support for the countertop.

NOTE! For free standing appliances secure

enough space, 1/2" on each side, to fit and handle

the appliance.

SINK

DISH-WASHER