IKEA ENHET kitchen Instrukcja instalacji - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wyposażenie wnętrz IKEA ENHET kitchen. IKEA ENHET kitchen 16 stron.

Preparing your room

Start by installing the supporting strips. You can use

any straight long piece of wood available at your local

hardware store.

To install the supporting base strip, align the top

of the strip with the baseline (125 mm). Screw the

strip to the studs you found behind your walls along

where your base cabinets will be located. Make sure

the strip does not go beyond where the last cabinet

ends or it will collide with your plinth at the end.

Assembling the cabinets and frames

Before you start assembling the

cabinets, try to set up a good work

area that is safe and where you

have enough room. Be sure to

protect the floors and make sure

you have the recommended equip-

ment/tools close-by.

Sort the packages into groups to

avoid confusion over which pieces

belong to the cabinet assembly

and which belong to appliances,

for example.

For a good workflow, it is a good

idea if you assemble all frames one

by one and push them aside until

the time comes to install them.

It's helpful if you arrange your

cabinets in the order you will be

installing them. Use your packing

list and IKEA home planner draw-

ing to help you.

Note: Don't install a supporting base strip behind

ENHET open base frames, nor the dishwasher.

ENHET cabinets can be installed with or without a plinth, depending on your personal preference.

See page 12 for info on how to assemble the legs if you choose to have a plinth.

For the upper strips, align the top of the strip with

the 1466mm line. Then, screw the strips to the studs

you've located behind your wall. The upper strips

are only temporary and will be removed once you've

installed the cabinets.