Bristan CAS BAS C Instrukcja instalacji - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Armatura kuchenna i łazienkowa Bristan CAS BAS C. Bristan CAS BAS C 20 stron. Casino tap range
Drukuj stronęInstallation
Basin Mixer
1. Screw the flexi tails into the bottom of
the mixer body by hand only (DO NOT
OVERTIGHTEN).
2. Place the plinth over the hole in the
basin and feed the flexi tails through the
hole, ensuring the washer is fitted
between the plinth and the basin.
3. Screw the fixing rod into the bottom of
the tap. Slide 'C' shaped rubber washer
and 'C' shaped metal washer onto the
fixing rod up to the underside of the basin.
4. To secure the mixer in place tighten the
fixing nut onto the fixing rod until it is fully
tightened against the 'C' shaped metal
washer. A suitable spanner can be used to
fully tighten the fixing nut.
5. Connect the flexi tails to the hot and
cold water supplies.
6. Turn on both water supplies, fully open
both valves, letting the water run for a few
minutes to flush out the system.
7. Fit the clicker waste ensuring the
rubber washer is fitted between the basin
and the waste. Place the other rubber
washer under the basin and secure by
tightening the backnut, in order to fill
the basin, the button in the middle of the
waste needs to be pressed down. To
release the water, press the button again.
8. Check all joints and connections for any
leaks.
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
11