Bristan 1500 Instrukcje instalacji i instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcje instalacji i instrukcja obsługi dla Armatura łazienkowa Bristan 1500. Bristan 1500 16 stron. Thermostatic power shower
Drukuj stronę
- 1. Table of Contents
- 2. Important Safety Information
- 3. Product Features
- 4. Electrical Requirements
- 5. Water Requirements
- 6. Fitting Your Shower
- 7. Fitting the Riser Rail
- 8. Commissioning - Testing the System
- 9. Operating the Shower
- 10. Adjusting the Showerhead
- 11. Cleaning & Maintenance
- 12. Troubleshooting
- 13. Spare Parts
- 14. Guarantee
- 15. Service Policy
Product Features
1
eco
3
4
4
2
3
1
4
2
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisors.
1. Push Button STOP/START Switch
Electronic switch
2. Temperature Control
Adjustable Temperature Control
3. Eco Button
Non-powered shower
4. Hose outlet
Shower hose outlet
Removing cover
1. Temperature Control handle
2. Graphic Ring
3. Logo
4. Screws (x3)
Please note that this product comes packaged
with the front cover and control knobs already
in place. These have to be removed to install the
shower. Please follow the procedure below.
Pull off control knob (1).
To remove the graphic ring (2) which surrounds
the main control knob, insert a thin bladed
screwdriver into the recess (arrowed) gently prise
off the ring, revealing two fixing screws.
Remove lower logo (3) by inserting a thin bladed
screwdriver in the slot, to reveal the lower fixing
screw.
Remove all three fixing screws (4). The cover can
now be slowly removed - care should be taken
not to strain wiring which is attached to the front
cover.
This procedure can be reversed to replace the
front cover and control knob after installation to
the wall.