Bristan ST PUMP20TN Instrukcja instalacji, obsługi i konserwacji - Strona 14
Przeglądaj online lub pobierz pdf Instrukcja instalacji, obsługi i konserwacji dla Pompa wodna Bristan ST PUMP20TN. Bristan ST PUMP20TN 20 stron. Standard 1.5/2.0 bar twin/single ended shower pump
Drukuj stronę6 MAINTENANCE
z
6.12 Water scale: As water is heated scale deposits are released in areas of hard
water, scale can cause the mechanical seal to stick if left without use for long
periods. The pump must be run for at least 5 minutes every four weeks to
"exercise" all working parts. Run on cool water. See Section 7 - Technical
Specification for note on water temperature. This particularly applies to guest
bathrooms used infrequently.
6.13 Cleaners, Disinfectants and Descalents:
Do not remove the terminal box cover. No user serviceable
parts inside.
6.11 There are no user serviceable parts available for the pump.
Acid based descalents and aggressive cleaning agents must not
come into contact with the pump. The pump must be removed from
the system prior to the use of these products. The system should be
flushed to remove all chemicals before the pump is re-connected.
If in any doubt as to the suitability of the chemical solutions, please
contact Bristan.
- 14 -
Cont ...