AFRISO DIM 20 Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe AFRISO DIM 20. AFRISO DIM 20 20 stron. Digital pressure gauge
Drukuj stronę
2.4
Qualification of personnel
2.5
Modifications to the product
2.6
Use of spare parts and accessories
2.7
Liability information
DIM 20
Increased danger
The danger increases in case of gases or liquids under high pres-
sure. If parts under pressure become leaky or burst, staff in front of
the digital pressure gauge must not be endangered by leaking me-
dium of parts of the device.
All pertinent guidelines and directives must be observed if dangerous
media such as the media listed below are measured:
•
Oxygen
•
Acetylene
•
Flammable media
•
Toxic media
This also applies to refrigerating plants, compressors, etc.
The product may only be installed, commissioned, operated, main-
tained, shut down and disposed of by qualified, specially trained per-
sonnel.
Electrical work may only be carried out by qualified electricians in
accordance with local and national regulations.
Changes or modifications made to the product by unauthorised per-
sons may lead to malfunctions and are prohibited for safety reasons.
Use of unsuitable spare parts and accessories may cause damage
to the product.
Use only the manufacturer's genuine spare parts and accesso-
ries (refer to chapter 0, page 19).
The manufacturer shall not be liable for any direct or consequential
damage resulting from failure to observe the technical instructions,
guidelines and recommendations.
The manufacturer and the sales company shall not be liable for costs
or damages incurred by the user or by third parties in the use or ap-
plication of this device, particularly in case of improper use of the de-
vice, misuse or malfunction of the connection, malfunction of the de-
vice or of connected devices. The manufacturer or the sales com-
pany shall not be liable for damages resulting from any use other
than the use explicitly stated in this instruction manual.
The manufacturer shall not be liable for misprints.
Safety
5