Bristan IRSD1-BN Instrukcje instalacji i instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcje instalacji i instrukcja obsługi dla Dozownik Bristan IRSD1-BN. Bristan IRSD1-BN 16 stron. Infrared automatic soap dispensor
Również dla Bristan IRSD1-BN: Instrukcje instalacji i instrukcja obsługi (16 strony)
Drukuj stronę
Installation -
7. Connect Power Supply Cable
Before starting any electrical work
ensure the power supply is isolated.
Wire the electrical power cable into a
switched fused spur off the ring main.
The blue wire should be wired to the
neutral connection and the brown
wire should be connected to the live
connection.
Note: For full electrical requirements see
'Electrical Connections' in 'Installation
Requirements' section on page 5.
Important: The power lead must be
permanently connected to the fixed wiring
of the mains supply using the factory
supplied power cable.
Plug the power cable into the power cable
on the pump.
8. Inserting Batteries
Remove the battery cover by loosening the
screw in the top of the cover.
Insert 4 x AA batteries into the battery
box ensuring they are inserted the correct
way.
Note: Only use 1.5V AA (LR6) Alkaline
batteries (preferably => 2000mAh for good
battery life).
Replace the battery box cover and tighten
the screw. Insert the battery box into the
holder.
Push the holder into the battery box wall
bracket.
8
cont.
Battery
Case