Gamma 5003 Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Maszyny naciągowe Gamma 5003. Gamma 5003 20 stron. 6 point mounting
Również dla Gamma 5003: Instrukcja obsługi (20 strony), Instrukcja obsługi (19 strony), Instrukcja obsługi (20 strony)
Drukuj stronę
ASSEMBLY INSTRUCTIONS
Base Leg Assembly
The stringing machine uses a four leg base
design. The legs must be assembled to the
support post before use. Remove the lower
column support from the carton. This is the
larger of the two posts and has the GAMMA
label.
Note: For illustration purposes, the support
column has been painted white for these
instructions.
Align the holes in the leg flange with the
matching holes in the lower column support
post. Secure the leg with one FLAT HEAD
cap screw through the upper hole, and one
SOCKET HEAD cap screw through the bot-
tom hole. Repeat this procedure for the three
remaining legs.
Base Foot Height Adjustment
Each foot of the Base Stand can be ad-
justed to compensate for uneven surfaces.
Upper Column Support Assembly
Insert the upper column support into the
lower column support / base leg assembly.
Leave the upper column extended to maxi-
mum height and lock in place with the two set
screws located at the top of the lower
column support.
4