Gamma PRO 100 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Maszyny naciągowe Gamma PRO 100. Gamma PRO 100 11 stron.

MOUNTING THE RACQUET

Installing the Racquet Support Adapters

The PRO 100 is supplied with two styles of

Racquet Support Adapters. A thick profile

adapter for widebody racquets and a thin

profile adapter for conventional racquet

frames. The Adapters are also tapered, use

the highest side of the adapter that does not

interfere with the string grommet holes.

Adjusting the Frame Support Posts

Place the racquet frame over the center

posts and onto the frame support posts.

Loosen the locking screws on one support

post and slide the post in the appropriate

direction until the plastic adapter contacts

the frame. Securely tighten the locking

screws. Adjust the opposite post in the same

manner.

It is extremely important both plastic adapt-

ers are in contact with the frame to prevent

racquet damage.

Securing the Racquet

With the frame support posts properly ad-

justed, place the frame hold down plates

over the center screws and tighten the clamp

bar knobs securely. Do not overtighten the

knobs as frame damage may occur.

Note: Inverted throat racquet frames may

require the throat clamp plate to be rotated

180 degrees to match the frame.