Gamma X-6FC Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Maszyny naciągowe Gamma X-6FC. Gamma X-6FC 20 stron.
Również dla Gamma X-6FC: Instrukcja obsługi (20 strony)
Drukuj stronę
ASSEMBLY INSTRUCTIONS
center posts should not contact the racquet prior to locking down the support posts.
MOUNTING THE FRAME
String Clamp Installation
The post of the string clamp and tube of
the string clamp base are treated with
grease to provide protection against corro-
sion during shipping. Remove any exces-
sive grease with a clean cloth prior to use.
The post and tube may also be cleaned
with isopropyl alcohol. After this type of
thorough cleaning, the post and tube
should be treated with a light coating of
machine oil to protect the surfaces against
corrosion and to ensure smooth operation.
Adjusting the Frame Support Posts
Loosen the lock bolts of the frame support
posts and space them apart with the frame
support slides separated by the approximate
length of the racquet head. Although it is not
required, it is good practice to center the sup-
port posts on the turntable. Lock one of the
posts in position by tightening the lock bolt and
position the other post until the frame support
slide is positioned near the inside surface of
the racquet frame. Securely tighten the lock
bolt of the second support post.
Caution: To avoid racquet damage, the
Tightening the Frame Supports
Tighten the Frame Support Slides by turn-
ing the adjustment knob clockwise until
snug against the racquet frame and slight
resistance is felt.
Caution: Overtightening the Center Sup-
ports will stretch the head of the racquet and
could cause racquet damage.
7