Gamma X-Els Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Maszyny naciągowe Gamma X-Els. Gamma X-Els 20 stron.
Również dla Gamma X-Els: Instrukcja obsługi (20 strony)
Drukuj stronę
- 1. Table of Contents
- 2. Warranty
- 3. Features
- 4. Assembly Instructions
- 5. Power Connection & Controls
- 6. Mounting the Frame
- 7. Stringing the Frame
- 8. Additional Features
- 9. Pathfinder Awl
- 10. Calibration
- 11. Maintenance & Adjustments
- 12. Troubleshooting Tips
- 13. Notes
- 14. Parts List
- 15. Parts Drawing
Caution: To avoid racquet damage, the center posts should not contact the racquet prior to
locking down the support posts.
MOUNTING THE FRAME
Adjusting the Frame Mounting
Stands
Loosen the lock bolts of the frame support
posts and space them apart with the frame
support slides separated by the approximate
length of the racquet head. Although it is not
required, it is good practice to center the sup-
port posts on the turntable. Lock one of the
posts in position by tightening the lock bolt and
position the other post until the frame support
slide is positioned near the inside surface of
the racquet frame. Securely tighten the lock
bolt of the second support post.
Tightening the Frame Supports
Tighten the Frame Support Slides by turn-
ing the adjustment knob clockwise until
snug against the racquet frame and slight
resistance is felt.
Caution: Overtightening the Center Supports
will stretch the head of the racquet and could
cause racquet damage.
Frame Shoulder Support Adjustment
Being sure the shoulder supports are free to
swivel in their mountings, simultaneously rotate
the shoulder support adjustment knobs clockwise
until both shoulder supports gently and squarely
contact the frame.
7