Gamma X-ST Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Maszyny naciągowe Gamma X-ST. Gamma X-ST 19 stron.
Również dla Gamma X-ST: Instrukcja obsługi (19 strony), Instrukcja obsługi (19 strony)

Gamma X-ST Instrukcja obsługi
ASSEMBLY INSTRUCTIONS
Setting the Gripper Jaw Spacing
The gripper jaws of the tensioner are adjust-
able to accomodate varying string gauges.
If the string slips through the gripper jaws
while pulling tension, rotate the gripper jaw
adjustment screw counter-clockwise.
If the string is damaged while pulling tension,
rotate the gripper jaw adjustment screw
clockwise.
The jaws will be properly adjusted when
there is enough pressure to securely grip the
string without causing damage to the string.
Tensioner Travel Stop
The tensioner bar is equipped with a
tensioner travel stop to limit travel of the
tensioner along the bar and prevent contact
between the tensioner and the racquet
mounting system while stringing. The travel
stop is located about midpoint along the
tensioner bar below the gear track.
To disengage the stop, pull and hold the knob,
rotate 90 degrees and release. To engage
the stop, repeat the above procedure until
Travel Stop
the travel stop pin protrudes beyond the
opposite surface of the tensioner bar.
Turntable Brake
The turntable may be locked in any position.
Flip the lever down to lock the turntable brake
and flip the up to release the turntable brake.
5