Major Manufacturing HIT-66-240 Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zamki Major Manufacturing HIT-66-240. Major Manufacturing HIT-66-240 7 stron. Template for mortise lock
Drukuj stronęInstall the mortise lock positioning plate. The
plate will fit into the 1-1/4" x 8" faceplate cut
out. There will be a 3/8" diameter pin
centered on the plate. There is no top or
bottom to worry about.
Slide the HIT-66 template with the alignment
guide alignment pin and tighten to door.
Alternate tightening between the top and
bottom clamp. Do not attempt to tighten one
clamp all the way at once.
With a 3/8" twist drill,
drill the thru bolt
holes on both sides
of the door. These
holes go to the mor-
tise cavity. Do not try
to drill from one side
through to the other.
PAGE 4