jakob HIT-TRAC 16B Podręcznik użytkownika - Strona 15

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wyciągarki jakob HIT-TRAC 16B. jakob HIT-TRAC 16B 19 stron.

4.1.5 Traction rope

Unwinding and winding up the rope must be done properly according to ISO 4309.

Matching accessories:

XXX rope reel and carrying tube

Reel drive 4 (Art.: 00395)

Reel drive 6 (Art. 01651)

Only insert the rope at the end of the preparation work. This allows the rope to be pre-tensioned by hand and laid around

the drive wheel at a suitable point without an idle stroke. The rope is laid into the drive wheel according to the following

sketch or information sign (10).

1. Unlock housing cover (11) with cover handle (12) and fold up.

2. Create a loop of rope, pulling rope (3) at the bottom.

3. Swivel in pulling rope (3) at the bottom in the cable guide (4).

4. Lay loose rope end (2) at the top in the cable guide (4) and under pressure roller (1) (lift rocker).

5. Lay rope loop in rope groove of drive wheel (9).

6. Pulling rope (3) over guide roller (6) (press rocker downwards).

7. On loose rope and (2) pull the rope into the rope groove of the drive wheel (9).

8. Check correct location of rope one more time.

9. Close housing cover (11) and lock with cover handle (12).

∙ Copyright by Jakob AG Switzerland

15 / 19