Major Science MP-300 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zasilanie Major Science MP-300. Major Science MP-300 16 stron. Powerpoint power supply

Installation Instructions

Place on a sturdy and level surface in a safe, dry place, and connect with a

buffer filled electrophoresis system.

1. Place the power supply on a sturdy and level surface in a safe, dry place,

away from laboratory traffic.

2. Ensure that the AC power switch is OFF, and then plug the three-pronged

power cord into a grounded three-prong AC outlet of the appropriate voltage

(110V to 240V as indicated on the rating sticker near the AC cord on the

back of the unit).

3. Turn the AC power ON by the switch on the rear of the machine.

4. Connect the DC output jacks from the electrophoresis unit; insert the red

lead (+) into the red output jack, and the black lead (-) into the black output

jack.

5. Press

Key, and then press

suitable voltage.

6. Press

Key, and then press

suitable current.

The power supply will then run in constant voltage at the voltage set or

constant current at the current set, depending on which setting is

exceeded first. If the current is too low at the voltage set, the voltage

setting should be increased. If the voltage is too low at the current set,

the current should be increased.

Key or

Key to select the