IKEA 904.131.24 Podręcznik - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik dla Piekarnik IKEA 904.131.24. IKEA 904.131.24 16 stron.
Również dla IKEA 904.131.24: Podręcznik (36 strony)
Drukuj stronę
ENGLISH
Replace immediately the door glass panels
when they are damaged. Contact the
Authorised Service Centre.
Clean the appliance with a moist soft
cloth. Use only neutral detergents. Do not
use abrasive products, abrasive cleaning
pads, solvents or metal objects. Do not clean
Installation
The appliance must be handled and
installed by two or more persons - risk of
injury. Always use safety gloves and
enclosed footwear - risk of cuts.
Installation, including water supply (if
any) and electrical connections, service or
repair operation that involves the removal of
a cover which gives protection against
exposure to microwave energy (if any) and
repairs must be carried out by the
authorised installer. Follow the assembly
instructions supplied with the appliance.
Remove all the packaging. Make sure that
the appliance has not been damaged during
transport. In the event of problems, contact
the dealer or your nearest Authorised
Service Centre. Do not install or use a
damaged appliance.
Install the appliance in a safe and
suitable place that meets installation
Electrical warnings
Risk of fire and electric shock.
Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power supply.
Do not use extension leads, multi-plug
sockets or adapters. Do not operate the
appliance if it has a damaged power cable or
plug, if it is not working properly, or if it has
been damaged or dropped. The appliance
must be earthed. Always use a correctly
installed shockproof socket. The shock
To download the full version visit www.ikea.com
the catalytic enamel with detergents (if
applicable). Fat and food remaining in the
appliance can cause fire. Do not remove the
knobs from the appliance (if applicable). If
you use an oven spray, follow the safety
instructions on its packaging.
requirements. Do not use the appliance
before installing it in the built-in structure.
Do not pull the appliance by the handle.
Keep the minimum distance from other
appliances and units. Before mounting the
appliance, check if the oven door opens
without restraint.
Ensure that the appliance is switched off
and disconnected from the power supply
before performing any maintenance
operation - risk of electric shock. During
installation, make sure the appliance does
not damage the power cable - risk of fire or
electric shock. Only activate the appliance
when the installation has been completed.
Do not obstruct the minimum gap
between the worktop and the upper edge of
the oven - risk of burns.
protection of live and insulated parts must
be fastened in such a way that it cannot be
removed without tools. The electrical
components must not be accessible to the
user after installation.
The electrical installation must have an
isolation device which lets you disconnect
the appliance from the mains at all poles.
The isolation device must have a contact
opening width of minimum 3 mm. Use only
correct isolation devices: line protecting
cutouts, fuses (screw type fuses removed
6