Major tech MT 770 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe Major tech MT 770. Major tech MT 770 20 stron. Clamp meter
Również dla Major tech MT 770: Instrukcja obsługi (16 strony)

Drukuj stronę

1. Ac Current Measurement

Before making measurements ensure that the

function selector switch is set on the

appropriate range position.

Always make sure that the plug of each test

lead is inserted fully into the appropriate

terminal of the meter.

Ensure that the function selector switch is set

to the "OFF" position after use. When the

meter will not be in use for a long period of

time, place it in storage after removing the

battery.

Do not expose the meter to direct sunlight,

extreme temperatures or moisture.

Do not use abrasives or solvents on the meter.

To clean it use a damp cloth and mild

detergent only.

Qualified and trained service technicians should

only perform calibration and repair of the meter.

2. FEATURES

Large 4000 count LCD display with bright

white LED backlight.

Wide measuring range from 0.01A AC up to

1000A AC

Measures AC and DC Voltage up to 600 volts

Measures resistance from 0.01Ω up to 40MΩ.

Capacitance measurements up to 100µF

Temperature measurement from -20ºC to

+1000ºC and -4ºF to +1832ºF.

Designed to the international safety standard

IEC61010 CAT lll 600V / CAT ll 1000V,

Pollution degree 2.

Auto Power Off after approximately 30

minutes to conserve battery life.

Continuity Buzzer and Diode Test

Frequency measurement up to 10MHz, with

Duty Cycle testing

Data Hold switch used to freeze reading on

display

! !

CAUTION