Major tech MT150 Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe Major tech MT150. Major tech MT150 12 stron. 50m laser distance meter
Drukuj stronę
8.4. Distance Unit Setting For Instrument
Click the button longer to change the next type of unit. The
Unit
following unit can be set:
Distance
1
0.000 m
0.0 in
2
0 1/16 in
3
0.000 ft
4
5
0'00" 1/16
8.5. Measuring
8.5.1. Single Distance Measurement
Press to activate the laser. Press again to trigger the distance
measurement. The measured value is displayed immediately.
8.5.2. Continuous Measurement (Tracking) & Max and Min
Measurement
The continuous measurement function (tracking) is used for the
transferring of measurements, e.g., from construction plans. In
continuous measurement mode, the measuring tool can be moved
to the target, whereby the measured value is updated approx.
every 0.5 seconds in the third line. The corresponding MIN and
MAX values are displayed dynamically in the first and second line.
As an example, the user can move from a wall to the required
distance, while the actual distance can be read continuously. For
continuous measurement, hold down the
continuous measurement. Press
the function. The function is terminated automatically after
continuous 100 times measurement.
MIN
8
Area
0.000 m²
0.000 ft²
0.000 ft²
0.000 ft²
0.000 ft²
or
OFF
MAX
Volume
0.000 m³
0.000 ft³
0.000 ft³
0.000 ft³
0.000 ft³
button to start the
button again to stop