Major tech MT402 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe Major tech MT402. Major tech MT402 8 stron. Non-contact ac voltage detector

Drukuj stronę

Warnings

! It is important that users of this tester read, understand, and

follow all warnings, cautions, safety information, and instructions

in this manual before operating or servicing this tester. Failure to

follow instructions could result in death or serious injury.

! Risk of electric shock and burn. Contact with live circuits could

result in death or serious injury.

! Use caution with voltages above 30V AC as a shock hazard may

exist.

! A steady red glow and continuous beep indicates voltage present.

If no indication, voltage could still be present.

! In bright light conditions, the LED visual indicators will be less

visible.

! Do not use if green LED is not illuminated.

! Do not use if tester appears damaged or if the tester is not

operating properly. If in doubt, replace the tester.

! Do not apply more than the rated voltage as marked on the tester

(1000V AC).

! Always wear approved eye protection.

! Before each use, verify operation by testing a known working

circuit that is within the rating of this tester.

! Do not rely on this tester with shielded wire. Operation may be

affected by differences in socket design and insulation thickness

and type.

! Comply with local and national safety requirements.

! If this tester is used in a manner not specified by the

manufacturer, protection provided by the tester may be affected.

Caution

• Do not attempt to repair this tester. It contains no serviceable parts.

• Do not expose the product to extremes in temperature or high humidity.

Symbols

Double Insulated

Caution. Risk of electric shock

Risk of danger. Important information. Read Manual. CAT IV

equipment is designed to protect against transients from the primary

supply level.