Major tech MT730 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe Major tech MT730. Major tech MT730 16 stron. Ac trms clamp meter

5. Automatic Power OFF

• In order to conserve battery life, the meter will automatically turn off

after approximately 15 minutes. To turn the meter on again, turn the

function switch to the OFF position and then to the desired function

position.

• Press and hold the MODE/VFD key and turn the selector switch to

turn the system on, the auto power off function will be cancelled.

WARNING: To avoid electrical shock, disconnect the meter from any

circuit, remove the test leads from the input terminals, and turn OFF the

meter before opening the case. Do not operate the meter with an open

case.

• Periodically wipe the case with a damp cloth and mild detergent; do

not use abrasives or solvents.

• If the meter is not to be used for 60 days or more, remove the battery

and store it separately.

1. Rotate Battery Door Lock 180 degrees to open the battery door.

2. Open the battery compartment.

3. Replace the 3 x 1.5V AAA batteries.

4. Secure the battery compartment.

Note: To use a Type K thermocouple probe that is terminated by a

subminiature (flat blade) connector, a subminiature-to-banana plug adaptor

is required.