Major tech MT935 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe Major tech MT935. Major tech MT935 8 stron. Phase rotation meter with rotary field direction
Również dla Major tech MT935: Instrukcja obsługi (8 strony)

Drukuj stronę
Major tech MT935 Instrukcja obsługi
The motor and phase rotation meter uses a 9V battery. To replace the
battery, follow these steps.
1.
Place the motor and phase rotation meter face down on a non-abrasive
surface and loosen the battery-door screw with a screwdriver.
2.
Lift the battery access lid away from the meter
3.
Observe the battery polarity shown in the battery compartment.
4.
Secure the battery access lid back in position with the screw.
Safety Information
Caution identifies conditions and actions that may damage the
MT935. Warning identifies conditions and actions that pose
hazard to the user.
Read First: Safety Information
To avoid possible electric shock or fire, do the following:
•
Read the following safety information carefully before using or servicing
the instrument.
•
Adhere to local and national safety codes.
•
Protective equipment must be used to prevent shock and injury.
•
Use of instrument in a manner not specified by the manufacturer may
impair safety features/protection provided by the equipment.
•
Avoid working alone.
•
When using the probes, keep fingers away from probe contacts. Keep
fingers behind the finger guards on the probes.
•
Measurements can be adversely affected by impedances of additional
operating circuits connected in parallel or by transient currents.
•
Verify operation prior to measuring hazardous voltages (voltages above
30V AC RMS, 42V AC peak and 60V DC).
•
Do not use the meter with any parts removed.
•
Do not use the meter around explosive gas, vapor or dust.
•
Do not use the meter in a wet environment.
Specifications
Phase Rotation
Visual Indication
Operating Temperature
Humidity
Operating Altitude
Pollution Degree
Type of Protection
Battery
Current Consumption
Dimensions
Clockwise or Anti-clock wise
LCD
0°C to 40°C
15 to 80%
2000m
2
IP40
9V
Max 20mA
130 x 69 x 32mm