Major tech MT941 Podręcznik - Strona 14
Przeglądaj online lub pobierz pdf Podręcznik dla Przyrządy pomiarowe Major tech MT941. Major tech MT941 16 stron. 5-in-1multifunction environmental meter
Również dla Major tech MT941: Instrukcja obsługi (12 strony)
Drukuj stronę
6.
Press the
7.
Press the
display.
8.
If you want to change the area number after step 6.
Press the
Press the ▲ or ▼ button to scroll to chose the area that you want
to change.
Then press the
flashing digit.
Press the ▲ or ▼ button to change the flashing digit from 0 to 9.
Press the
Press the ▲ or ▼ button to change the flashing digit.
The order is from right to left.
Press the
7.18. Holding the Displayed Readings
1.
Press the
The display shows HOLD.
2.
Press the
7.19. Viewing the MIN, MAX, and AVG Readings
1.
Press the
minimum (MIN), or the average (AVG) readings.
2.
Press the
velocity, Temperature (humidity probe), and K-Type Temperature.
3.
Press the
sound, air flow and humidity value.
4.
Press the
Notes: HOLD, MIN/MAX/AVG and Setup can be used when measuring
8. Replacing the Batteries
1.
Turn off the meter.
2.
Loosen the screw and remove the battery cover.
3.
Replace the 9V battery.
4.
Replace the battery cover and tighten the screw.
button to change the area in secondary display.
button again to change the flow in the secondary
button for 2 seconds to start area setting option.
button to indicate that area number with a
button to change the station of flashing digit.
button to show the air flow number.
button to freeze the readings on the display.
HOLD
button again to turn off the HOLD function.
HOLD
button to step through the maximum (MAX),
button to show the MIN/MAX and AVG of air
button to show the MIN/MAX and AVG of light,
button for 2 seconds to exit MAX/MIN/AVG mode.
14