Major tech MT943 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe Major tech MT943. Major tech MT943 12 stron. Data logging light meter

6. BATTERY CHECK-UP & REPLACEMENT

1. If the battery power is not sufficient, LCD will display low battery and

replacement of one new battery is required.

2. After turning off the meter, disconnect the battery cover with a

screwdriver.

3. Disconnect the battery from the instrument and replace it with a

standard 9V battery and replace the cover.

On the detector, the applied photo diode with filters makes the spectral

sensitivity characteristic meeting C.I.E.(INTERNATIONAL COMMISSION

ON ILLUMINATION) Photo curve V (λ ) as the following chart described.

8. CONNECTING TO PC

Windows 10 or higher.

1. Switch the light meter on.

2. Plug the other end of the connecting cable to serial interface of the PC

(USB).

3. Plug the USB line connecting cable 13.6mm jack plug into the meter

socket

4. Start the light meter software.

5. Selecting the COM port 3, note select the 4 COM.

Note: You should switch the light meter on before you plug the USB line

connecting cable 13.6mm jack plug into the meter.