Major tech MTD73A Instrukcja obsługi - Strona 16
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe Major tech MTD73A. Major tech MTD73A 20 stron. 800a ac true rms digital clamp meter
Drukuj stronę
Non-Contact AC Voltage Measurements
WARNING: Risk of Electrocution. Before use, always
test the Voltage Detector on a known live circuit to
verify proper operation
1.
Touch the probe tip to the hot (LIVE) conductor or insert
into the hot (LIVE) side of the electrical outlet.
2.
If AC voltage is present, the detector red LED light will
illuminate.
a.
NOTE: The conductors in electrical cord sets are
often twisted. For best results, rub the probe tip
along a length of the cord to assure placing the tip
in close proximity to the live conductor.
b.
NOTE: The detector is designed with high
sensitivity. Static electricity or other sources of
energy may randomly trip the sensor. This is normal
operation
Data HOLD /
1.
To freeze the LCD reading, press the
data hold is active, the
Press the
operation.
2.
The LCD is equipped with backlighting for easier viewing,
especially in dimly lit areas. Press the
seconds to turn the LCD backlight on and off.
Flashlight
Hold down the
the flashlight.
Key
button again to return to normal
SELECT
Key for 2 seconds to turn on and off
button. While
icon appears on the LCD.
button for 2