Major tech MTD73A Instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe Major tech MTD73A. Major tech MTD73A 20 stron. 800a ac true rms digital clamp meter
![Major tech MTD73A Instrukcja obsługi](/uploads/products/server2/2055530/2055530.jpg)
Safety
International Safety Symbols
This symbol, adjacent to another symbol or
terminal, indicates the user must refer to the
manual for further information.
This symbol, adjacent to a terminal, indicates that,
under normal use, hazardous voltages may be
present.
Double insulation.
Application around and removal from uninsulated
hazardous live conductors is permitted.
SAFETY NOTES
•
Do not exceed the maximum allowable input range of
any function.
•
Do not apply voltage to meter when resistance
function is selected.
•
Set the function switch OFF when the meter is not in
use.
•
Remove the battery if meter is to be stored for longer
than 60 days.
WARNINGS
•
Set function switch to the appropriate position before
measuring.
•
When measuring volts do not switch to
current/resistance modes.
•
Do not measure current on a circuit whose voltage
exceeds 600V.
•
When changing ranges always disconnect the test
leads from the circuit under test.