KitchenAid KEC Instrukcja instalacji - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Płyta grzewcza KitchenAid KEC. KitchenAid KEC 16 stron. Electric cooktop
Również dla KitchenAid KEC: Instrukcja instalacji (10 strony), Instrukcja instalacji (16 strony)

Drukuj stronę

3-Wire Cable from Power Supply to 3-Wire

Cable from

Cooktop

IMPORTANT: Use the 3-wire cable from power supply where local

codes permit connecting the frame-ground

conductor to the

neutral (white) junction box wire:

A. Red wires

B. Bare or green wire from

cooktop

C. 3-wire cable (from cooktop)

D. Junction

box

E. White wire (from power supply)

F. UL listed wire nut

G. Black wire

H. UL listed or CSA approved

conduit connector

1. Disconnect power

2. Remove junction box cover, if present.

3. Connect the flexible cable conduit from the cooktop to the

junction box using a UL listed or CSA approved conduit

connector.

4. Tighten screws on conduit connector if present.

5. Connect the two black wires together using the UL listed wire

nuts.

6. Connect the two red wires together using the UL listed wire

nuts.

7. Connect the green or bare cooktop cable wires to the white

(neutral) wire in the junction box using the UL listed wire nuts.

8. Install junction box cover.

9. Reconnect power.

NOTE: This section applies only if you are using clamp brackets.

........................................................

..................................

i/i_

iii

...............................

.................................

A. Glass cooktop

D. Countertop

B. Burner box

E. 2Y," (6.4 cm) clamping screw

C. Clamp bracket

E Attachment

screw

1. Place the 21/2 '' (6.4 cm) clamping screws into the brackets.

2. Check to be sure the cooktop is still level.

3. Use a flat-blade screwdriver to tighten the screws against the

countertop. Do not overtighten.

1. Check that all parts are now installed. If there is an extra part,

go back through the steps to see which step was skipped.

2. Dispose of/recycle all packaging materials.

3. Use a mild solution of liquid household cleaner and warm

water to remove waxy residue caused by protective shipping

material. Dry thoroughly with a soft cloth. For more

information, see the "Cooktop Care" section of the

Use and Care Guide.

4. Read "Cooktop Use" in the cooktop Use and Care Guide.

NOTE: If the cooktop does not work after turning on the power,

check that a circuit breaker has not tripped or a house fuse has

not blown. See "Troubleshooting"

section in the Use and Care

Guide for further information.

If you need Assistance

or Service:

Please reference the "Assistance or Service" section of the Use

and Care Guide or contact the dealer from whom you purchased

your cooktop.