Major tech MTC50 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Multimetr Major tech MTC50. Major tech MTC50 14 stron. 2-in-1 lan tester & multimeter

Drukuj stronę
typically indicate 0.400 to 0.700V. Reverse voltage will indicate
"OL". Shorted devices will indicate near 0V and an open device
will indicate "OL" in both polarities
MAX Hold button
To hold the highest reading on the LCD
1.
Press the MAX hold button. The meter reading will not
change as readings change
2.
Press the MAX hold button again to return to normal
operation.
Hold Button
The Data Hold function allows the meter to "freeze" a
measurement for later reference
1. Press the "DATA HOLD" button to "freeze" the display, the
"HOLD" indicator will appear.
2. Press the "DATA HOLD" button to return to normal
operation.
AUTO POWER OFF
The auto off feature will turn the meter off after 15 minutes.
REPLACING THE BATTERY
1. Remove the bottom cover and secure the screw.
2. Replace old batteries with fresh Two 1.5V AAA & 9V
type battery.
3. Replace the bottom cover and secure the screw.
10