Major tech MT235 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt testowy Major tech MT235. Major tech MT235 4 stron. Battery tester

4.2. MINIMUM VOLTAGE SPECIFICATIONS

Battery Type

Button Cell 1.5V

AAA-N-1.5V

AA-C-D-1.5V

Lithium 3V

12V

15V

22.5V

5. OPERATION

5.1. TESTING A BATTERY

NOTICE: Always identify the battery polarity before testing.

NOTICE: To avoid excessive drain on the battery under test, do not press

the push button (5) down when using the test leads or short the test leads

across one another when pressing the button (5).

NOTICE: Do not allow the test leads to touch the metal positive and

negative contact points on the tester during any battery test.

1. Set the battery selector (4) to the type of battery you are testing. If the

battery selector (4) is incorrectly positioned, an inaccurate test will result

and may damage the tester and cause excessive drain on the battery.

2. Touch the red test lead (6) to the positive (+) terminal on the battery and

the black test lead (7) to the negative (-) terminal on the battery.

3. Observe the battery condition on the LCD display (1).

4. When testing 9V rectangular batteries, position the positive (+) and

negative (-) battery terminals directly onto the positive and negative

contact points (3 and 2), then observe the battery condition on the LCD

display (1).

Load Current

50mA

150mA

100mA

10mA

Min Voltage for Good Indication

1.125V ± 0.09V

2.25V ± 0.18V

4.5V ± 0.36V

6.75V ± 0.54V

9V ± 0.72V

11.25V ± 0.9V

16.875V ± 1.35V