Major tech MT700 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt testowy Major tech MT700. Major tech MT700 16 stron. Voltage & current tester

4. Operation

Prior to every test. please ensure that the instrument is in perfect

condition:

• For example, keep an eye out for a broken housing, leaking

batteries and damaged test leads.

• Always carry out a function test before using the voltage tester,

see below.

• Check that the instrument is functioning properly (for example at

a known voltage/current source) before and after every test.

• If the safety of the user can not be guaranteed. switch off the

instrument and secure it to prevent unintentional usage.

• In the off state, press the Power/Mode Button to turn on.

• In the power-on state, press and hold the Power/Mode Button

to switch off.

• Put a single wire into the opening clamp head, and the LCD will

display the current present.

• Place the wire in the correct position of the open jaw head,

otherwise the measurement will be inaccurate.

• The LCD will display the reading.