Airflow MaxAir 7105A Instrukcje instalacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Wentylator Airflow MaxAir 7105A. Airflow MaxAir 7105A 4 stron. Window exhaust fan

7105A Auto Switched & 7107A Pull-Cord Switched

Fig. C

7105A Connection Diagram

7107A Connection Diagram

Place cover assembly as shown, over fan

assembly and tighten retaining screw. Test.

Ready to go.

Cover

assembly

HOLE CENTRE

External

isolating

switch

External

isolating

switch

Pull-cord

switch

Retaining

screw

HOLE CUT-OUT TEMPLATE

MaxAir Window Exhaust Fan Installation Instructions

WARNING:

The appliance is not intended for use by children

or infirm persons without supervision.

Children should be supervised to ensure they do

not play with the appliance.

Appliance intended to be mounted on external

window only.

NOTE: SHUTTER OPERATION

Do not turn auto-switched models on without

the front cover fitted. Auto-Switched fans are

fitted with a thermal actuator, thus requiring

approximately three minutes to fully open and

approximately 60 seconds to close shutters.

Pull-cord models are operated either by the built

in pull-cord and/or separate switch (thermal

actuator). If it is decided to use and operate fan

via a separate switch, the delay on opening and

closing of shutters must also be noted.

230mm