Majorcom: EMAGP16 Podręcznik użytkownika - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla System mikrofonowy Majorcom: EMAGP16. Majorcom: EMAGP16 13 stron.
4
EMAGP16
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other appa-
ratus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the plugs, conve-
nience receptacles, and at the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug the apparatus during lightening sorts or when unused for long periods of time.
13. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or mois-
ture, does not operate normally, or has been dropped.
14. Disconnecting from mains: Switching off the POWER switch all the functions and light in-
dicators of the amplifier will be stopped, but fully disconnecting the device from mains is
done unplugging the power cord from the main input socket. For this reason, it always shall
remain readily operable.
15. Equipment is connected to a socket-outlet with earthing connection by means of a power
cord.
16. The marking information is located at the bottom of apparatus.
17. The apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on apparatus.
NOTE:
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense.
WARNING:
This product must not be discarded, under any
circumstance, as unsorted urban waste. Take to the nearest elec-
trical and electronic waste treatment center.
MAJORCOM. accepts no liability for any damage that may be caused to
people, animals or objects due to failure to comply with the warnings above.
Usermanual V1.1
56, chemin
de la Flambère ·
F a x 3 3 ( 0 ) 5 6 1 3 1 8 7 7 3 · [email protected] ·
31300 Toulouse ·
FRANCE · T é l . 3 3 ( 0 ) 5 6 1 3 1 8 6 8 7
www.majorcom.fr
IMPORTANT NOTE
3.
Thank you for choosing our MAJORCOM EMAGPE16digital paging station!
VERY IMPORTANT
It is
to carefully read this manual and to fully understand its contents before
any connection in order to maximize your use and get the best performance from this equipment.
To ensure optimal operation of this device, we strongly recommend that its maintenance be car-
ried out by our authorized Technical Services.
MAJORCOM EMAGPE16comes with an X-year warranty.
INTRODUCTION
4.
EMAGPE16is a desktop paging station compatible with MAJORCOM ePXN1616 digital audio ma-
trix and with PXN88, PXN88SG and PXN1212SG MAJORCOMNet matrices (Note: from February
2019). With its buttons, LED indicators, electronic ink technology zone name display and goose-
neck microphone, it is possible to select the destination zones for voice messages, find out if
these zones are already controlled elsewhere, capture the voice message and send it in real time
to the destination zones.
The main features of the EMAGPE16station are:
• 2 0 mechanical keys with integrated LED status indicators (paging zone selection mana-
gement)
• 1 mechanical key with adjacent LED indicators (message activation, PAGE key)
• E lectronic ink display (shows paging zone names)
• G ooseneck microphone, with standard XLR connector
• M anagement of up to 16 paging zones
• R J45 connector for single CAT5 or higher cabling (point-to-point), including power, au-
dio output signal (picked up by the microphone) and digital control bus between the
ePXN1616 unit (RS-485 bus) or PXN matrices (CAN bus) and the EMAGPE16station
• C ompatible with CAN bus communication (supporting in this mode PXN88, PXN88SG
and PXN1212SG MAJORCOMNet matrices)
• C onnector for backup power supply (optional)
• T wo EMAGPE16units, with different or equal priority levels, can work simultaneously
on the same ePXN1616 matrix
• F our EMAGPE16units, with different or equal priority levels, can work simultaneously
on the same PXN88 matrix
56, chemin
de la Flambère ·
F a x 3 3 ( 0 ) 5 6 1 3 1 8 7 7 3 · [email protected] ·
EMAGP16
Usermanual V1.1
31300 Toulouse ·
FRANCE · T é l . 3 3 ( 0 ) 5 6 1 3 1 8 6 8 7
www.majorcom.fr
5