ENGLISH
Clock functions
Clock functions table
Clock function
TIME OF DAY
MINUTE MINDER
DURATION
END
Press
again and again to
switch between the clock
functions.
To confirm the settings of the
clock functions, press
seconds for an automatic
confirmation.
Setting the DURATION or END function
during cooking function
1. Press
again and again until the
display shows
or
flashes in the display.
2. Press
or
to the set the values and
press
to confirm.
For Duration
first you set the minutes
and then the hours, for End
the hours and then the minutes.
An acoustic signal sounds for 2 minutes
after the time ends.
To set, change or check the time of day. Refer to "Set-
ting the time".
Use to set a countdown time (maximum 23 h 59 min).
This function has no effect on the operation of the ap-
pliance. You can set the MINUTE MINDER at any time,
also if the appliance is off.
To set how long the appliance operates. Use only when
an oven function is set.
To set when the appliance must deactivate. Use only
when an oven function is set. You can use Duration and
End at the same time (time delay), if the appliance is to
be activate and deactivate automatically later.
or wait 5
or
.
first you set
or
symbol and
Application
time setting flash in the display. The oven
stops.
3. Press any button to stop the acoustic
signal.
If you press
hours for DURATION
appliance goes to setting of the
END
function.
Setting the MINUTE MINDER
1. Press
again and again until
"00" flash in the display.
2. Press
or
to set the MINUTE
MINDER.
First you set the seconds, then the
minutes and then the hours.
At first, the time is calculated in minutes
and seconds. When the time you set is
longer than 60 minutes, the symbol
comes on in the display.
when you set the
, the
and
12
Drukuj stronę