CenturionPro DBT 3 Instrukcja obsługi - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Urządzenia przemysłowe CenturionPro DBT 3. CenturionPro DBT 3 16 stron. With variable speed control
Drukuj stronę
CLEANING & MAINTENANCE
STEP 1:
SOAK WITH
A.
Cover entire Tumbler and
Blade Sheet with a thick coat
COOKING OIL
of cooking oil (olive, vegeta-
ble, etc). Let it sit for 3-12hrs.
STEP 1:
SHUT OFF MOTOR.
UNPLUG POWER
CORDS
.
STEP 2:
INSTALL THE
BLADE SHEET:
A.
Reach inside the machine
and install the Blade Sheet
by gently placing the sheet
on the metal tabs until all
holes are resting evenly on
metal tabs on both sides of
the machine.
STEP 3:
INSTALL THE
TUMBLER:
A.
With motor off, power cord
unplugged, and the machine
in a vertical position, using 2
people, slide the Tumbler
gently into the machine. Ro-
tate Tumbler counter-clock-
wise to lock it in place.
STEP 5:
RE-TENSION
BLADE SHEET:
A.
Flip the pawl so it is in contact
with the ratchet and prevents
the ratchet from moving in a
counter clockwise direction.
B.
Turn tension adjustment knob
clockwise slightly until you en-
counter minor resistance and
the Blade Sheet has come in
full contact with the Tumbler.
MONTHS OF WORK CAN BE RUINED IN A FEW HOURS AT THE END SO PLEASE BE PATIENT AND TAKE YOUR TIME WITH THE HARVESTING AND CURING PROCESS.
For more information or to watch our DIY video tutorials visit cprosolutions.com
BEFORE RE-ASSEMBLY
STEP 2:
USING WARM/
HOT WATER
3.A
5.A
A.
Using warm/hot water, con-
NOTICE:
centrated dish soap and a
non-metallic dish scrubber,
clean the Tumbler and other
machine components by hand.
2.A
5.B
OWNERS MANUAL
MODEL 3 DBT
REASSEMBLE
For best results use hot water whenever possible.
Be careful when selecting the degreaser that it will
not damage the painted or anodized components
of the trimmer. Always follow the operating in-
structions provided with the pressure washer.
IMPORTANT
NOTE:
MOTOR & SPEED
CONTROL BOX
ARE NOT WATER-
PROOF. DO NOT
GET WET. REMOVE
WHEN NECESSARY.
11