CenturionPro BUCKER Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria CenturionPro BUCKER. CenturionPro BUCKER 8 stron.

Drukuj stronę

CONVEYOR

STEP 1

SPRAY BELT WITH A DISH SOAP AND WATER SOLU-

TION, AND WIPE CLEAN WITH A SOFT CLOTH.

RINSE. THOROUGHLY DRY WITH SOFT CLOTH.

STEP 2

LOOSEN TENSIONER BOLT USING WRENCH.

ADJUST BOTH SIDES EQUALLY TO HOLD THE

CONVEYOR SQUARE.

STEP 3

THERE SHOULD NOW BE SLACK IN THE CON-

VEYOR BELT, WHICH WILL ALLOW ONE PER-

SON TO HOLD THE BELT UP, WHILE THE OTHER

CLEANS UNDERNEATH THE BELT.

STEP 4

PULL BELT AWAY FROM ROLLERS. CLEAN AROUND

THE ENTIRE ROLLER ON EACH END. WIPE THE

CONVEYOR FRAME TO CLEAN OFF ANY RESIDUE.

ONLY USE ISOPROPYL ALCOHOL ON METAL COMPONENTS.

STEP 5

TIGHTEN TENSIONER BOLT USING WRENCH UN-

TIL CONVEYOR IS TIGHT, ENSURE TO DO BOTH

SIDES EVENLY TO KEEP CONVEYOR BELT SQUARE.

IF THE CONVEYOR STARTS TRACKING TO ONE SIDE, AD-

JUST THE TENSIONING BOLTS TO CORRECT. SEE BELT AD-

JUSTMENT INSTRUCTIONS.

SPECIFICATIONS

BUCKER CONVEYOR

Input Voltage

Bucker Conveyor Dimensions

(L x W x H)

Bucker Belt Dimensions (L x W)

Belt Material

Motor Horsepower

Speed Range

Warranty

For more information or to watch our video tutorials visit cprosolutions.com

1.1 Amp - 120V 60 Hz, NA

0.55 Amp - 220V 50 Hz, EU/AUS

60in x 7in x 20-25in

152cm x 18cm x 51-64cm

60in x 3.5in

152cm x 9cm

Polyurethane, 1.3mm, Food Grade

1/8 HP

0-10 in/s

1 year

CONVEYOR POSITIONING

BUCKER CONVEYOR:

POSITION THE BUCKER OVER TOP OF THE CONVEYOR SO THAT

PRODUCT CAN DROP ONTO THE CONVEYOR. THE CONVEYORS

HEIGHT CAN BE ADJUSTED BY LOOSENING THE BOLTS ON

EACH OF THE LEGS. ONCE IN POSITION, PRESS DOWN THE

LOCKING CASTORS ON THE TRIMMER AND CONVEYOR TO

PREVENT MOVEMENT.

OWNERS MANUAL

BUCKER CONVEYOR

CLEANING