Green Energy GECI Podręcznik użytkownika - Strona 11
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Ładowarka Green Energy GECI. Green Energy GECI 15 stron. Black diamond charger
Drukuj stronę
When the programming sequence is completed, the display will show the message:
At this point, it's possible to disconnect the battery from the charger.
If the battery is left connected, a charge cycle will be initiated.
The Battery ID Module will keep the information in memory for an unlimited time.
In order to erase the memory, it's necessary to disconnect the ID module from the battery.
PROGRAMMING HARDWARE RULES
In order to erase the memory, it's necessary to disconnect the ID module from the battery.
PROGRAMMING HARDWARE RULES
During installation and programming activity it is necessary to ensure that
During installation and programming activity it is necessary to ensure that the position of the battery power
the position of the battery power cables and charger cables are correct.
cables and charger cables are correct. As illustrated below, it is important that the cables are not overlapping or
entwined in the cables of another battery.
As illustrated below, it is important that the cables are not overlapping or
entwined in the cables of another battery.
.
Failure to comply with these instructions may disturb the communication signals from the battery module, if this
occurs the charger will generate the following alarm.
ENERGY METERING AND HISTORY LOG
The internal memory of the BLACK DIAMOND charger contains a log of the last >200 charge cycles. More than 50
parameters are saved for every charge cycle. The most significative parameters of the 50 most recent cycles can be
visualized on the display of the charger, while the complete history log can be accessed and downloaded through
DoctorFleet.com management system. In order to visualize the 50 most recent cycles, it's sufficient to scroll the menu
using the UP- DOWN buttons, and to press ENTER for 3 seconds in order to access the database. The results of each
charge cycle are represented on two pages. Use the UP-DOWN buttons to scroll between each record.
No
Failure to comply with these instructions may disturb the communication signals from the battery
module, if this occurs the charger will generate the following alarm:
No
First page:
No =
Where:
Vstart =
Vstop =
No =
No =
Date and Time =
Vstart =
Vstart =
Vstop =
Vstop =
Date and Time =
Date and Time =
Second page:
ENDCODE
Where:
ENDCODE
Date and Time =
ENDCODE =
Date and Time =
ENDCODE =
Date and Time =
Duration =
ENDCODE =
Duration =
Ah =
Ah
=
Duration =
Ah
=
[V.140 – January 2011]
[V.140 – January 2011]
fig.1 correct position of the cables.
[V.140 – January 2011]
GECI
BLACK DIAMOND CHARGER
™
fig.2 incorrect position of the cables.
VSTART
VSTOP
Date and Time
VSTART
VSTOP
Date and Time
Number of cycle (1 is the most recent)
Battery Voltage at the connection
Battery Voltage at the end of the charge
Number of cycle (1 is the most recent)
Number of cycle (1 is the most recent)
Date and Time of the BEGINNING of the charge
Battery Voltage at the connection
Battery Voltage at the connection
Battery Voltage at the end of the charge
Battery Voltage at the end of the charge
Page 22/28
Date and Time of the BEGINNING of the charge
Date and Time of the BEGINNING of the charge
Date and Time
Duration Ah
Date and Time
Duration Ah
Date and Time of the END of the charge
Charge termination code (30 different codes identify all the possible situations that determined
Date and Time of the END of the charge
Charge termination code (30 different codes identify all
the termination of the charging cycle, see next paragraph).
the possible situations that determined the termination of
Date and Time of the END of the charge
Total charging time
the charging cycle, see next paragraph).
Charge termination code (30 different codes identify all
Total charging time
Total capacity returned to the battery
the possible situations that determined the termination of
Total capacity returned to the battery
the charging cycle, see next paragraph).
Total charging time
Total capacity returned to the battery
When the programming sequence is completed, the display will show the message:
.
At this point, it's possible to disconnect the battery from the charger.
If the battery is left connected, a charge cycle will be initiated.
IBCI BLACK DIAMOND
User's Manual
The Battery ID Module will keep the information in memory for an unlimited time.
IBCI BLACK DIAMOND
User's Manual
IBCI BLACK DIAMOND
Failure to comply with these instructions may disturb the communication signals
User's Manual
module, if this occurs the charger will generate the following alarm:
BATT ID MODULE
SET = OK!
fig.1 correct position of the cables.
Page 21/28
fig.2 incorrect position of the cables.
Page 22/28