Deco Style PRG500J Podręcznik - Strona 13
Przeglądaj online lub pobierz pdf Podręcznik dla Rozpylacz farby Deco Style PRG500J. Deco Style PRG500J 20 stron. 500w paint sprayer with spray shelter
Drukuj stronę
7.4.6 Wind ropes (13-6)
Tie one side of the wind rope (13-6) up to the spray
shelter, and fix the other side on the ground.
Repeat the other side. (See Fig 3-14)
8. OPERATION
8.1 Unlock button (1) (See Fig. 4)
You will need to remove the gun head for cleaning
or replacement. Depress the unlock button (1) to
disassemble the gun head. Pull the gun head (14) away
from the sprayer body.
To re-assemble, just push the gun head to the motor
housing with sufficient force.
8.2 Trigger switch(3) (See Fig. 5)
Plug in the power plug to the mains power socket and
turn the power on.
Squeeze the trigger switch (3) to start the sprayer.
Release pressure from the trigger switch (3) to stop the sprayer.
8.3 Selecting the spray patterns (See Fig. 6)
Unscrew the cap nut (9), and turn the air cap(8) to
desired position to fit the different operating conditions.
Then re-tighten the cap nut (9).
Following figure (See Fig.6) shows the air cap (8) position
with their corresponding spraying patterns:
A: Air cap is in horizontal position = the spraying shape is
vertical: for vertical surface;
B: Air cap is in vertical position = the spraying shape is
horizontal: for horizontal surface;
C: Air cap is in diagonal position =the spraying shape is
circular: for corners, edges and others.
WARNING: Never turn the air cap(8) when trigger
switch (3) is depressed.
AFTER SALES SUPPORT:
1300 889 028
AUS
13
MODEL: PRG500J PRODUCT CODE: 10562 09/2019
Fig. 3-14
Fig. 4
Fig. 5
A
B
C
Fig. 6