GaN EZ Drive GS65011-EVBEZ Podręcznik techniczny - Strona 2
Przeglądaj online lub pobierz pdf Podręcznik techniczny dla Płyta główna GaN EZ Drive GS65011-EVBEZ. GaN EZ Drive GS65011-EVBEZ 18 stron. E-hemt open loop boost evaluation board
Drukuj stronę
_____________________________________________________________________________________________________________________
DANGER!
Electrical Shock Hazard - Hazardous high voltage may be present on the board
during the test and even brief contact during operation may result in severe injury
or death. Follow all locally approved safety procedures when working around
high voltage.
Never leave the board operating unattended. After it is de-energized, always wait
until all capacitors are discharged before touching the board.
This board should be handled by qualified personnel ONLY.
PCB surface can become hot. Contact may cause burns. Do not touch!
CAUTION:
This product contains parts that are susceptible to damage by electrostatic
discharge (ESD) or exposure to voltages in excess of the specified voltage. Always
follow ESD prevention procedures when handling the product. Avoid applying
excessive voltages to the power supply terminals or signal inputs or outputs
GSWPT-EVBEZ Rev. 210307
EZDrive
© 2021 GaN Systems Inc.
Please refer to the Evaluation Board/Kit Important Notice on page 17
®
Open Loop Boost Evaluation Board
www.gansystems.com
GS65011-EVBEZ
Technical Manual
2