Green Force Diamond 600 Podręcznik użytkownika - Strona 8
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Latarka Green Force Diamond 600. Green Force Diamond 600 17 stron. Modular lighting systems
Drukuj stronę- 1. Table of Contents
- 2. PWM Technology
- 3. Green Force Hybrid & TOS
- 4. Temperature Protection
- 5. End of Battery Life
- 6. Maintenance of Your Dive Light
- 7. Flexi Battery Packs
- 8. Hybrid Battery Packs
- 9. Using Your Green Force Dive Light
- 10. Controlling the Power
- 11. Green Force Dynamic Power Management
- 12. Green Force Dynamic Beam
- 13. Diamond Backup Light
- 14. Depth Rating & Warranty
possible to charge LiFePO4 with a Li-Ion charger and vice versa. Trying to do
so could result in irreparable damage to the cells and/or charger.
The charger is equipped with 2 charging slots. It is possible to charge only
one or two cells. Each slot is equipped with a two color LED: red light means
'charging', green light means 'battery charged'. Charging will usually take 2 to
4 hours. When not in use you can store the batteries in a dry area to minimize
the self discharge. Recharge the batteries after each use and at least every 6
months when not in use.
Charging batteries of a Hybrid 8 or Hybrid 12 battery pack:
You can fit the Hybrid 8 and Hybrid 12 battery packs with rechargeable NiMH
AA batteries and charge them with the Hybrid charging kit (optional). The Hy-
brid 8 battery pack can also be equipped with a 10 cell battery pack (optional)
that has more capacity (2.2Ah).
Never connect the battery pack to a charger when the battery pack is fitted
with non-rechargeable batteries (Alkaline, Lithium metal, Zink Cobalt, ...).
Charge the NiMH batteries before first use!
umbilical (optional) from the battery pack and replace it with the Green Force
charging plug. Connect the charger cable to the charging plug (the plug is pro-
Hybrid
Remove (unscrew) the light head or
Battery Packs
tected against reversed polarity and can only be connected one way) and con-
nect the charger to the mains (AC 100V to 240V, 50/60Hz). Once connected
a red and green LED will light up. When the charging process is started only
the red LED will be lit up. The Green Force charger will detect when the battery
is fully charged. At this moment the green LED will be lit up and the charging
process will be stopped. You can disconnect the battery and the charger from
the mains at this point.
When not being used, you can store the battery pack in a dry area to minimize
the self discharge. Recharge the batteries after each use and at least every 6
months when not being used for extended periods.
Not charging your battery pack regularly can lead to deep discharge and your
battery cells will suffer from irreparable damage and capacity loss. Deep dis-
charged batteries are not covered by warranty.
8