Century CC6121.2 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Ładowarka Century CC6121.2. Century CC6121.2 13 stron. 8-stage battery charger and maintainer

Drukuj stronę

ELECTRICAL PARTS & ACCESSORIES:

AC Power:

DC Output Lead:

Charging Leads:

TECHNICAL SPECIFICATIONS:

Model Number

Output

Input Voltage

Input Frequency

Charge Voltage

Float Voltage

Start Voltage

Operating Temperature

Storage Temperature

Operating Humidity

Size (L*W*H)

Weight

Approvals

CHARGING INSTRUCTIONS:

STEP 1 - Pre charge check & electrolyte level check

•

Check the Battery Electrolyte levels (On Sealed Maintenance Free batteries, check the State of

Charge indicator). If necessary, remove the vent caps and add distilled water so the levels are

halfway between the upper and lower fill lines.

•

Check the battery voltage, type and Ah capacity to ensure the charger is compatible.

Visit http://www.centurybatteries.com.au/battery-charging or

http://www.centurybatteries.co.nz/battery-charging for further advice.

•

Ensure the battery is in a well ventilated area and the charger should be as far away from the

battery as the cables permit.

IMPORTANT: Please make sure the correct battery

•

voltage is selected to suit your battery type. For 6V

batteries make sure the unit is switched to 6V and for

12V batteries make sure the unit is switched to 12V.

The battery voltage select switch is located on the left

hand side of the charger.

4 • Owner's manual - Model. CC6121.2

SAA 2 Pin AU Plug

1.2m with quick connect

Quick connect 60cm Crocodile Clip harness and 60cm

Ring Terminal harness

CC6121.2

1.2A @ 6V DC & 12V DC

100-240Vac / 0.4A - 0.2A (22W) - 12V

100-240Vac / 0.24A - 0.12A (11W) - 6V

50/60Hz

7.2V / 14.4V

6.8V / 13.6V

3V / 8V

-10 to 40° C

-25 to 85°C

90% RH Max.

109mm x 64mm x 35mm

500g (approx.)

CE, AS/NZS, EMC

Battery voltage selection switch