decoflame Athlantic Tower Podręcznik użytkownika - Strona 13
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kominek wewnętrzny decoflame Athlantic Tower. decoflame Athlantic Tower 17 stron. Wall-mounted decoflame bioethanol fireplace
Drukuj stronędecoflame® Atlantic Series User Manual English – Version 3 – January 2013
Atlantic Series
INSTALLATION GUIDE
ATLANTIC AND ATLANTIC TOWER
Before you start installation of your fireplace,
please check that the packaging is intact and
that all parts as listed below are included.
Contents of the box:
1. Screw-on caps for steel studs (4)
2. Glass screen, 6mm hardened glass (1)
3. Rubber O-rings (4)
4. Brushed stainless steel studs (4)
5. Burner situated in safety chamber, and
slider lid (1 each)
6. Back plate (black aluminium) (1)
7. . Installation in Norway or Sweden: side
covers (2). Installation elsewhere: black
washers (2)
8. Mounting bracket (1)
9. Bolt screws with washers (2 each)
10. Distance pieces (2)
11. Handle for Slider (1)
12. User Manual (1)
13
11
12
Installation of Atlantic and Atlantic
Tower
1. For each countersunk hole in the
mounting bracket first mark perfectly in
level and thereafter drill five holes into the
wall. Use for the type of wall suitable
metal rawlplugs/butterfly screws/
expansion bolts to fit the bracket.
2. Use the screws and washers to fix the
safety chamber onto the back plate. Take
two of the stainless steel studs and fix
them through the bottom holes of the
back plate with the two distance pieces.
Use the remaining two stainless steel
studs to fix both side covers (for installa-
tion in Norway and Sweden) and the back
plate to the mounting bracket by screwing
them through the top holes in the back
plate into the holes in the mounting
bracket. For installation in all other
countries, please use the two black
washers instead of the side brackets. Do
not force those studs into the threaded
holes! Do not screw them in completely
but leave them slightly loose.
3. Place the burner inside the safety
chamber and its slider lid on top of it - the
little stud facing to the right. Slide rubber
O-rings onto the four stainless steel studs,
place the glass screen onto the studs
resting it on the O-rings and fix with the
screw-on caps without tightening them
completely. Now tighten the upper studs
left and right. Tighten the screw on caps.
Should you find that a hole in the glass
screen seems out of place, unscrew the
relevant stud slightly which will help fitting
the glass screen.