GANN Klima 20 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Rejestratory danych GANN Klima 20. GANN Klima 20 19 stron.

Drukuj stronę
1.5

Display symbols - Klima 30

Measurement 1
Status info
External
temperature
sesnor
Figure 1-4 Display symbols Klima 30
Measurement 1
Unit measurement
1
Measurement 2
Unit measurement
2
MIN-MAX-AVG
Status info
Battery indicator
External
temperature sensor
Data logger Klima 20 / 30
AVG – MIN - MAX
Shown in the upper part of the display ; shows the actual temperature
value measured by the internal sensor
This sign informs about the currently selected measurement unit of
reading 1
It is possible to switch between °C = Celsius, °F = Fahrenheit,
%RH = relative humidity, td = dew point temperature
Values of the internal or external temperature sensor will be displayed;
internal sensor: Maximum, minimum and average values
This sign informs about the currently selected measurement unit of
reading 2 (°C, °F, %RH or td possible)
Shows the min-, max- and average temperature
Mode „LOG" or „STOP" is displayed; „LOG": data logger records;
„STOP": no measurement values are recorded
Current state of the battery
EXT = external temperature sensor is adapted; value is shown at
measurement 2
Introduction
Unit
measurement 1
Battery
Unit
measurement 2
Measurement 2
10