IKEA 505.577.27 Podręcznik - Strona 17

Przeglądaj online lub pobierz pdf Podręcznik dla Hob IKEA 505.577.27. IKEA 505.577.27 48 stron.
Również dla IKEA 505.577.27: Podręcznik (36 strony)

Drukuj stronę

ENGLISH

continue to run after the appliance is

turned off if the detected temperature of

the cooktop is still too hot after turning it

off.

• Rhythmic sounds, similar to the ticking

sound of a clock: this noise occurs only

when at least three cooking zones are

Care and cleaning

General information

Warning! Switch off the appliance

and let it cool down before you

clean it.

Warning! For safety reasons, do

not clean the appliance with

steam blasters or high-pressure

cleaners.

Warning! Sharp objects and

abrasive cleaning agents will

damage the appliance. Clean the

appliance and remove the

residues with water and dish soap

after each use. Remove also the

remnants of the cleaning agents.

Scratches or dark stains on the

glass ceramic that cannot be

removed do not affect the

functioning of the appliance.

Troubleshooting

Warning! Refer to Safety

chapters.

What to do if...

Problem

You cannot switch on the ap‐

pliance or operate it.

Removing the residues and stubborn

residues

Food containing sugar, plastics, or tin foil

residues should be removed at once. A

scraper is the best tool for cleaning the glass

surface. It is not supplied with the appliance.

Place a scraper on the hob surface at an

angle and remove residues by sliding the

blade over the surface. Clean the appliance

using a damp cloth and some dish soap.

Finally, wipe the glass surface dry with a

clean cloth.

Limescale rings, water rings, fat splashes, or

shiny metallic discolourations should be

removed after the appliance has cooled

down. Use only a specialised cleaner for

glass ceramic or stainless steel.

Possible cause

The hob is not connected to

an electrical supply or it is

connected incorrectly.

operating and disappears or weakens

when some of them are switched off. The

noises described are a normal element of

the described induction technology and

should not be regarded as defects.

Check if the hob is correctly

connected to the electrical

supply. Refer to the connec‐

tion diagram.

Remedy