decon IN0120 Instrukcja montażu

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Akcesoria do kamer decon IN0120. decon IN0120 8 stron. Simplex

Attachment IN0120 for mounting Simplex attendant control is designed to be as flexible as

possible. This makes it possible to achieve the desired position as the attachment can be

mounted in several different ways. Consider different options before deciding. The maximum

width between the pipe clamps to be mounted is 510mm.

The attachment also includes a hinge that allows the handle to be folded down when not in

use. This is to reduce the length of the chair in narrow spaces, for example in an elevator.

NOTE! Neither the handle nor the attachment is intended to withstand the entire chair

weight during manual driving. This means that the handle should be folded down and that

the regular handles of the wheelchair should be used in situations when the chair is to be

lifted or driven in demanding environments.

1. Start by getting acquainted with the attachment and go through the different sections

as below.

1. Screw for locking clamp

2. Levels

3. Klick-lock

4. Screw for adjusting the ball's position, width and length

5. Frictionhinge

6. Screw for locking

7. Extension brackets and screws. Used for mounting on wide chairs.

2020-06-23

Assembly Instruction IN0120 Simplex

Max 510mm

1(8)