Britax R032S Series Podręcznik - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik dla Meble dla niemowląt i małych dzieci Britax R032S Series. Britax R032S Series 6 stron. Portable cot

3. TO FOLD THE COT (con't)

Pull the strap up in the middle of the base and then pull

base up approximately 50cm.

Release each top rail by lifting the rail slightly and

squeezing on the buttons, located in the centre joint.

The buttons are located under centre of each rail.

IF THE TOP RAILS DO NOT FOLD - DO NOT FORCE

THEM - LIFT THE BASE HIGHER AND RE SQUEEZE THE

BUTTONS TO FULLY RELEASE THEM.

Ensure that each rail is fully released and then pull all

the way up on the cot base strap, while gathering the

legs and the frame together until its fully folded.

DISASSEMBLE AND STORE THE BASSINET AND CHANGE

TABLE IN THE CARRY BAG.

Take the mattress and wrap it around the folded cot

with the padded side facing inwards.

Thread the straps through the plastic loops,

pull them tight and secure using the hook and

loop attachments.

Take the carry bag and cover the folded cot.

Finish covering the cot and close the zipper, with the

mattress handle through the opening.

www.britax.com.au

E/F

4. TO USE THE BASSINET

Insert the 2, two-piece support rods into bassinet

inner sleeves separately, then engage them in the

middle by the locking pin.

Insert the mattress and secure it to the bassinet

by passing the loop straps through the slots in the

bassinet base, then press the loop straps onto the

hook padding, sewn to the underside of the bassinet.

Lower the bassinet within the cot with warning

label at short end.