Airflow DUPLEX RS5 2500/ 700 Instrukcja montażu - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Centrale wentylacyjne Airflow DUPLEX RS5 2500/ 700. Airflow DUPLEX RS5 2500/ 700 16 stron. Air-handling units

Drukuj stronę

●

The appliance may only be transported on handling blocks (included). During transportation the

appliance must be protected against mechanical damage and water penetration and all openings

must be covered with protective covers.

●

During transportation the appliance must be secured against falling. The mode of transport must

also eliminate any falls of the appliance or instances of the appliance getting loose.

●

Activities near the unit such as grinding, cutting and other ancillary works that could irretrievably

damage the surface or individual parts of the unit are prohibited.

Solely permitted methods of handling

lifting straps

3 . D e s c r i p t i o n

3.1.

General

DULEX RS5 series ventilation units with heat recovery are compact appliances equipped with five

ports. Besides supply and extraction ports, the unit contains also fifth port used for circulation. In a

single cabinet, there are two independently powered fans with flexibly mounted engines, a highly

efficient heat recovery exchanger assembled from thin-walled plastic boards for the recovery of

heat/cool, a by-pass damper, slide-out filters of supply, extraction and circulation air, condensate drain

pans and depending on selected accessories also an integrated heater, chiller, shut-off dampers,

flexible flanges and a control system.

support blocks

min. fork distance 800mm

DUPLEX RS5

H (mm)

1500/ 700

1500/1000

1250

2500/ 700

2500/1000

3500/1200

3500/2000

1400

5500/1200

5500/2000